Why You Should Have More Than One SAAB Replacement Key
Keep an extra key handy to save time and hassle. Especially when your key fob ceases to function for no reason. The most frequent reason for a key fob not working is the battery is dead. However there are other causes as well.
It could cost around PS1500 to get a new car key at a dealership and the job can take anywhere from 10 to 15 days.
Transponder key
Transponder keys are keys for cars that have an electronic chip inside the key fob. These chips communicate with immobilizer in your vehicle by using radio signals. These keys are designed to stop theft by making it harder for thieves to get started on the vehicle. Transponder keys can be used to track the vehicle that was stolen. This is because, when you insert the key into the immobilizer it will transmit a signal via GPS to your vehicle.
Transponder keys are now standard on the majority of new vehicles. This is an excellent security measure to prevent theft. However, older cars may not have them. You can still buy transponders from an auto dealer if your vehicle does not have one. A new transponder can be much cheaper than a traditional "blade key".
You can buy a replacement key online, or at an auto dealership. The key will have to be programmed. This can be done by an authorized locksmith or dealer. The process typically takes a few minutes and costs a fraction of what you'll pay at the dealership. It's vital to keep a spare key in case you lose your original or in the situation of an emergency. Making an attempt to start your vehicle without a functioning key could cause damage to the ignition system, and prevent it from turning on.
Keys that are wired
Saab owners should always have more than one key for their car. The dealer will need an instrument specifically designed to work on older cars. However you can do it yourself for less than 200 dollars if have the right components. To get a second key, you will need a replacement case and a new transmitter+transponder, but you can find these for a lot less than the dealer charges.
Batteries in these remotes can end up dying over time. It is important to change them regularly and it's not difficult to accomplish. All you need is a small flathead screwdriver along with some patience. Put the screwdriver in the slot in middle of the case, and gently open it. After the case has split open, you will be able to access the electronics inside.
The shift and space-bar keys contain a copper wire beneath them that connects the pressure pad to electronic. It is important to remove the wire from the keys, as it can prevent the car from being able to recognize the key. The wire also connects the ignition to the key. Remove it before replacing the key.
Remote key
The SAAB 9-3 03-11 is one of the most stunning vehicles on the market. However it can be difficult to operate. The buttons may become squishy and the key fob isn't as durable as it should be. Fortunately, there's a simple solution: you can replace the key case yourself.
To do so you'll need a fresh key and an extra case available at all auto parts stores. You'll need a flathead screwdriver along with an entirely new key to get rid of the old electronics. When you remove the electronic components, be sure to remove them gently. They could easily get damaged.
Use saab 93 replacement key to cut open the case once you've removed the electronics. You'll want to be as gentle as you can to ensure that you don't harm the plastic. Once you have opened the case, you'll be clear about the battery clearly and take it out it easily.
Most used Saabs come with only a single key. A second key requires an specialized computer (often called the CIM) and an entirely new key and programming in order to convince the vehicle that you're not trying to steal the vehicle. Most locksmiths will not do this because it's too expensive. You can do it yourself if you are resourceful and lucky to find the right components at a reasonable price.
Keyless entry
Whether your Saab has an alarm system or not, it's always a good idea to get a spare key. It is easy to copy the old-fashioned metal keys, but it is more difficult to steal a car with the newer keyfob-based security system. The older style metal keys don't have security features. Modern ones have security features.
First, remove the emergency key. You'll need a screwdriver to accomplish this, so ensure you have one. After you have removed the emergency key and using a flathead, split open the case. This will allow you to see the battery and replace it.
Reassemble the keyfob following the installation of the new battery. Be sure to align the pieces correctly and don't forget to check the limiters as they hold the battery in place. Once you're done you can put the ignition key and resynchronize it to the car. You're ready to go! This is an easy method to save money while also keeping your vehicle safe. Make sure that the battery you purchase is the same label as the original and is compatible. Otherwise, the key won't perform as it should.